X-Git-Url: http://wagnertech.de/git?a=blobdiff_plain;f=config%2Flx_office.conf.default;h=396c5760dd0835f0f64a141f6a8856e8ce64c138;hb=a71821962da6b8b6b16cdd44c6d446c7112fe03e;hp=dfaf17c0f40b2bdef2b227a96de4eff97743b735;hpb=d5440cc6f9cc5b2942458ce7480526e2b90b17a4;p=kivitendo-erp.git

diff --git a/config/lx_office.conf.default b/config/lx_office.conf.default
index dfaf17c0f..396c5760d 100644
--- a/config/lx_office.conf.default
+++ b/config/lx_office.conf.default
@@ -1,23 +1,84 @@
-[system]
-# EUR: Einnahmen-Überschussrechnung (net income method). Set this to 1
-# if your company uses the net income method and to 0 for balacing.
-eur = 1
+[authentication]
+# The cleartext password for access to the administrative part.  It
+# can only be changed in this file, not via the administrative
+# interface.
+admin_password = admin123
+
+# Which module to use for authentication. Valid values are 'DB' and
+# 'LDAP'.  If 'LDAP' is used then users cannot change their password
+# via Lx-Office.
+module = DB
+
+# The cookie name can be changed if desired.
+cookie_name = lx_office_erp_session_id
+
+# The number of minutes a session is valid. The default value is eight
+# hours.
+session_timeout = 480
+
+[authentication/database]
+# Connection information for the database with the user and group
+# inforamtion.  This information is always needed, even if LDAP is
+# used for authentication, as the user information is stored in this
+# database while LDAP is only used for password verification.
+#
+# If 'module' is set to 'DB' then this database also contains the
+# users' passwords.
+host     = localhost
+port     = 5432
+db       = lxerp_auth
+user     = postgres
+password =
+
+[authentication/ldap]
+# This section is only relevant if 'module' is set to 'LDAP'. It names
+# the LDAP server the passwords are verified against by doing a LDAP
+# bind operation.
+#
+# At least the parameters 'host', 'attribute' and 'base_dn' have to be
+# specified.
+#
+# tls:       Activate encryption via TLS
+# attribute: Name of the LDAP attribute containing the user's login name
+# base_dn:   Base DN the LDAP searches start from
+# filter:    An optional LDAP filter specification. The string '<%login%>'
+#            is replaced by the user's login name before the search is started.
+# bind_dn and bind_password:
+#            If searching the LDAP tree requires user credentials
+#            (e.g. ActiveDirectory) then these two parameters specify
+#            the user name and password to use.
+host          = localhost
+port          = 389
+tls           = 0
+attribute     = uid
+base_dn       =
+filter        =
+bind_dn       =
+bind_password =
 
+[system]
 # Set language for login and admin forms. Currently "de" (German),
 # "de_DE" (new German) and "en" (English, not perfect) are available.
 language = de
 
-# The database charset. Must match the database cluster you want to
-# connect to.
+# The database charset. Must match the encoding of the database cluster you want to
+# connect to. (Used on the shell command to create a database "pg_createcluster". Option "-e <encoding>".)
 dbcharset = UTF-8
 
 [features]
 # Activate certain optional features and modules.
 webdav = 0
-lizenzen = 1
 vertreter = 0
 
 # Show fields used for the best before date
+# ATTENTION! If you enabled this feature you can not simply turn it off again
+# without taking care that best_before fields are emptied in the database.
+# This can be done with the following query:
+#
+#  UPDATE inventory SET bestbefore = NULL;
+#
+# Any stock contents containing a best before date will be impossible to stock
+# out otherwise.
 show_best_before = 0
 
 ## Pictures for parts
@@ -28,6 +89,9 @@ parts_image_css = border:0;float:left;max-width:250px;margin-top:20px:margin-rig
 # Show the picture in the results when you search for parts
 parts_listing_images = 0
 
+# Should payments be changeable after posting (0 = never; 1 = every time; 2 = on the same day)
+payments_changeable = 1
+
 [paths]
 # path to temporary files (must be writeable by the web server)
 userspath = users
@@ -82,7 +146,7 @@ openofficeorg_daemon_port = 2002
 
 [task_server]
 # User name to use for database access
-login = mb
+login =
 # Set to 1 for debug messages in /tmp/lx-office-debug.log
 debug = 1
 # Chose a system user the daemon should run under when started as root.
@@ -101,20 +165,27 @@ email_template = templates/webpages/oe/periodic_invoices_email.txt
 
 [console]
 # autologin to use if none is given
-login = mb
+login =
 
 # autorun lines will be executed after autologin.
 # be warned that loading huge libraries will noticably lengthen startup time.
-autorun = require "bin/mozilla/common.pl";
-        = use English qw(-no_match_vars);
-        = use List::Util qw(min max);
-        = use Sort::Naturally;
-        = my ($a, $b, $e, $f, @a1, @a2, %h);
-        = sub take { my $max = shift; my $r = ref($_[0]) eq 'ARRAY' ? $_[0] : \@_; return @{$r}[0..List::Util::min($max, scalar(@{$r})) - 1]; }
+#autorun = require "bin/mozilla/common.pl";
+#        = use English qw(-no_match_vars);
+#        = use List::Util qw(min max);
+#        = sub take { my $max = shift; my $r = ref($_[0]) eq 'ARRAY' ? $_[0] : \@_; return @{$r}[0..List::Util::min($max, scalar(@{$r})) - 1]; }
 
 # location of history file for permanent history
 history_file = users/console_history
 
+# location of a separate log file for the console. everything normally written
+# to the lx-office log will be put here if triggered from the console
+log_file = /tmp/lxoffice_console_debug.log
+
+[testing]
+
+# autologin to use if none is given
+login = demo
+
 [debug]
 # Use DBIx::Log4perl for logging DBI calls. The string LXDEBUGFILE
 # will be replaced by the file name configured for $::lxdebug.
@@ -162,10 +233,19 @@ global_level = NONE
 # default.
 watch_form = 0
 
+# Include menu options for debugging in the HTML menu. Works only in
+# FastCGI mode.
+show_debug_menu = 0
+
 # If you want to debug the creation of LaTeX files then set this to 1.
 # That way the temporary LaTeX files created during PDF creation are
 # not removed and remain in the "users" directory.
 keep_temp_files = 0
 
+# Restart the FastCGI process if changes to the program or template
+# files have been detected. The restart will occur after the request
+# in which the changes have been detected has completed.
+restart_fcgi_process_on_changes = 0
+
 # The file name where the debug messages are written to.
-file_name = /tmp/mb-lxdebug.log
+file_name = /tmp/lx-office-debug.log