--- /dev/null
+[authentication]
+# The cleartext password for access to the administrative part. It
+# can only be changed in this file, not via the administrative
+# interface.
+admin_password = admin123
+
+# Which modules to use for authentication. Valid values are 'DB' and
+# 'LDAP'. You can use multiple modules separated by spaces.
+#
+# Multiple LDAP modules with different configurations can be used by
+# postfixing 'LDAP' with the name of the configuration section to use:
+# 'LDAP:ldap_fallback' would use the data from
+# '[authentication/ldap_fallback]'. The name defaults to 'ldap' if it
+# isn't given.
+#
+# Note that the LDAP module doesn't support changing the password.
+module = DB
+
+# The cookie name can be changed if desired.
+cookie_name = kivitendo_session_id
+
+# The number of minutes a session is valid. The default value is eight
+# hours.
+session_timeout = 480
+
+# The number of seconds to penalize failed login attempts. 0 disables
+# it.
+failed_login_penalty = 5
+
+[authentication/database]
+# Connection information for the database with the user and group
+# inforamtion. This information is always needed, even if LDAP is
+# used for authentication, as the user information is stored in this
+# database while LDAP is only used for password verification.
+#
+# If 'module' is set to 'DB' then this database also contains the
+# users' passwords.
+host = localhost
+port = 5432
+db = kivitendo_auth
+user = kivitendo
+password = admin123
+
+[authentication/ldap]
+# This section is only relevant if 'module' is set to 'LDAP'. It names
+# the LDAP server the passwords are verified against by doing a LDAP
+# bind operation.
+#
+# At least the parameters 'host', 'attribute' and 'base_dn' have to be
+# specified.
+#
+# tls: Activate encryption via TLS
+# verify: If 'tls' is used, how to verify the server's certificate.
+# Can be one of 'require' or 'none'.
+# attribute: Name of the LDAP attribute containing the user's login name
+# base_dn: Base DN the LDAP searches start from
+# filter: An optional LDAP filter specification. The string '<%login%>'
+# is replaced by the user's login name before the search is started.
+# bind_dn and bind_password:
+# If searching the LDAP tree requires user credentials
+# (e.g. ActiveDirectory) then these two parameters specify
+# the user name and password to use.
+# timeout: Timeout when connecting to the server in seconds.
+#
+# You can specify a fallback LDAP server to use in case the main one
+# isn't reachable by duplicating this whole section as
+# "[authentication/ldap_fallback]".
+#
+host = localhost
+port = 389
+tls = 0
+attribute = uid
+base_dn =
+filter =
+bind_dn =
+bind_password =
+timeout = 10
+verify = require
+
+[system]
+# Set language for login and admin forms. Currently "de" (German)
+# and "en" (English, not perfect) are available.
+language = de
+# MassPrint Timeout
+# must be less than cgi timeout
+#
+massprint_timeout = 30
+
+# Set default_manager for admin forms. Currently "german"
+# and "swiss" are available.
+default_manager = german
+
+# The memory limits given here determine the maximum process size
+# (vsz, the total amount of memory this process uses including memory
+# swapped out or shared with other processes) or resident set size
+# (rss, the amount of memory not swapped out/shared with other
+# processes). If either limit is reached at the end of the request
+# then the kivitendo process will exit.
+#
+# This only applies for processes under FCGI and the task manager.
+# For CGI configurations the process will be terminated after each request
+# regardless of this setting.
+#
+# Note: this will only terminate processes with too high memory consumption. It
+# is assumed that an external managing service will start new instances. For
+# FCGI this will usually be apache or the wrapper scripts for nginx, for the
+# task server this will have to be the system manager.
+#
+# Numbers can be postfixed with KB, MB, GB. If no number is given or
+# the number is 0 then no checking will be performed.
+memory_limit_rss =
+memory_limit_vsz =
+
+[paths]
+# path to temporary files (must be writeable by the web server)
+userspath = users
+# spool directory for batch printing
+spool = spool
+# templates base directory
+templates = templates
+# Path to the old memberfile (ignored on new installations)
+memberfile = users/members
+# Path to ELSTER geierlein webserver path inside kivitendo
+# (must be inside kivitendo but you can set an ALIAS for apache/oe
+# if set the export to geierlein is enabled
+# geierlein_path = geierlein
+
+#
+# document path for FileSystem FileManagement:
+# (must be reachable read/write but not executable from webserver)
+# document_path = /var/local/kivi_documents
+#
+
+[mail_delivery]
+# Delivery method can be 'sendmail' or 'smtp'. For 'method = sendmail' the
+# parameter 'mail_delivery.sendmail' is used as the executable to call. If
+# 'applications.sendmail' still exists (backwards compatibility) then
+# 'applications.sendmail' will be used instead of 'mail_delivery.sendmail'.
+# If method is empty, mail delivery is disabled.
+method = smtp
+# Location of sendmail for 'method = sendmail'
+sendmail = /usr/sbin/sendmail -t<%if myconfig_email%> -f <%myconfig_email%><%end%>
+# Settings for 'method = smtp'. Only set 'port' if your SMTP server
+# runs on a non-standard port (25 for 'security=none' or
+# 'security=tls', 465 for 'security=ssl').
+host = localhost
+#port = 25
+# Security can be 'tls', 'ssl' or 'none'. Unset equals 'none'. This
+# determines whether or not encryption is used and which kind. For
+# 'tls' the module 'Net::SSLGlue' is required; for 'ssl'
+# 'Net::SMTP::SSL' is required and 'none' only uses 'Net::SMTP'.
+security = none
+# Authentication is only used if 'login' is set. You should only use
+# that with 'tls' or 'ssl' encryption.
+login =
+password =
+
+[applications]
+# Location of OpenOffice.org writer
+openofficeorg_writer = oowriter
+# Location of the X virtual frame buffer used for OpenOffice
+xvfb = Xvfb
+# Location of the html2ps binary
+html2ps = html2ps
+# Location of the Ghostscript binary
+ghostscript = gs
+# Location of the pdflatex (or compatible, e.g. xetex) binary
+latex = pdflatex
+# Location of the Python interpreter to use when converting from
+# OpenDocument to PDF. Some distributions compile UNO support only
+# into binaries located in different locations than the main Python
+# binary.
+python_uno = python
+
+# Location of the aqbanking binary to use when converting MT940 files
+# into the kivitendo import format
+aqbanking = /usr/bin/aqbanking-cli
+
+[environment]
+# Add the following paths to the PATH environment variable.
+path = /usr/local/bin:/usr/X11R6/bin:/usr/X11/bin
+# Add the following paths to the PERL5LIB environment variable.
+# "/sw/lib/perl5" is for Mac OS X with Fink's Perl.
+lib = /sw/lib/perl5
+# Add the following paths to the PYTHONPATH environment variable for
+# locating Python modules. Python is used when converting OpenDocument
+# files into PDF files.
+python_uno_path =
+
+[print_templates]
+# If you have LaTeX installed set to 1
+latex = 1
+# Minimal support for Excel print templates
+excel = 0
+# Enable or disable support for OpenDocument print templates
+opendocument = 1
+# Chose whether or not OpenOffice should remain running after a
+# conversion. If yes then the conversion of subsequent documents will
+# be a lot faster. You need to have Python and the Python UNO bindings
+# (part of OpenOffice) installed.
+openofficeorg_daemon = 1
+openofficeorg_daemon_port = 2002
+
+[task_server]
+# Set to 1 for debug messages in /tmp/kivitendo-debug.log
+debug = 0
+# Chose a system user the daemon should run under when started as root.
+run_as =
+# Task servers can run on multiple machines. Each needs its own unique
+# ID. If unset, it defaults to the host name. All but one task server
+# must have 'only_run_tasks_for_this_node' set to 1.
+node_id =
+only_run_tasks_for_this_node = 0
+
+[task_server/notify_on_failure]
+# If you want email notifications for failed jobs then set this to a
+# kivitendo user (login) name. The subject can be changed as well.
+send_email_to =
+# The "From:" header for said email.
+email_from = kivitendo Daemon <root@localhost>
+# The subject for said email.
+email_subject = kivitendo Task-Server: Hintergrundjob fehlgeschlagen
+# The template file used for the email's body.
+email_template = templates/webpages/task_server/failure_notification_email.txt
+
+[periodic_invoices]
+# The user name a report about the posted and printed invoices is sent
+# to.
+send_email_to = mb
+# The "From:" header for said email.
+email_from = kivitendo Daemon <root@localhost>
+# The subject for said email.
+email_subject = Benachrichtigung: automatisch erstellte Rechnungen
+# The template file used for the email's body.
+email_template = templates/webpages/oe/periodic_invoices_email.txt
+
+[self_test]
+
+# modules to be tested
+# Add without SL::BackgroundJob::SelfTest:: prefix
+# Separate with space.
+modules = Transactions
+
+# you probably don't want to be spammed with "everything ok" every day. enable
+# this when you add new tests to make sure they run correctly for a few days
+send_email_on_success = 0
+
+# will log into the standard logfile
+log_to_file = 0
+
+# user login (!) to send the email to.
+send_email_to =
+# will be used to send your report mail
+email_from =
+# The subject line for your report mail
+email_subject = kivitendo self test report
+# template. currently txt and html templates are recognized and correctly mime send.
+email_template = templates/mail/self_test/status_mail.txt
+
+[console]
+# Automatic login will only work if both "client" and "login" are
+# given. "client" can be a client's database ID or its name. "login"
+# is simply a user's login name.
+client =
+login =
+
+# autorun lines will be executed after autologin.
+# be warned that loading huge libraries will noticably lengthen startup time.
+#autorun = require "bin/mozilla/common.pl";
+# = use English qw(-no_match_vars);
+# = use List::Util qw(min max);
+# = sub take { my $max = shift; my $r = ref($_[0]) eq 'ARRAY' ? $_[0] : \@_; return @{$r}[0..List::Util::min($max, scalar(@{$r})) - 1]; }
+
+# location of history file for permanent history
+history_file = users/console_history
+
+# location of a separate log file for the console. everything normally written
+# to the kivitendo log will be put here if triggered from the console
+log_file = /tmp/kivitendo_console_debug.log
+
+[testing]
+
+# Several tests need a database they can alter data in freely. This
+# database will be dropped & created before any other test is run. The
+# following parameters must be given:
+[testing/database]
+host = localhost
+port = 5432
+db =
+user = postgres
+password =
+template = template1
+superuser_user = postgres
+superuser_password =
+
+[devel]
+# Several settings related to the development of kivitendo.
+
+# "client" is used by several scripts (e.g. rose_auto_create_model.pl)
+# when they need access to the database. It can be either a client's
+# database ID or its name.
+client =
+
+[debug]
+# Use DBIx::Log4perl for logging DBI calls. The string LXDEBUGFILE
+# will be replaced by the file name configured for $::lxdebug.
+dbix_log4perl = 0
+dbix_log4perl_config = log4perl.logger = FATAL, LOGFILE
+ = log4perl.appender.LOGFILE=Log::Log4perl::Appender::File
+ = log4perl.appender.LOGFILE.filename=LXDEBUGFILE
+ = log4perl.appender.LOGFILE.mode=append
+ = log4perl.appender.LOGFILE.Threshold = ERROR
+ = log4perl.appender.LOGFILE.layout=PatternLayout
+ = log4perl.appender.LOGFILE.layout.ConversionPattern=[%r] %F %L %c - %m%n
+ = log4perl.logger.DBIx.Log4perl=DEBUG, A1
+ = log4perl.appender.A1=Log::Log4perl::Appender::File
+ = log4perl.appender.A1.filename=LXDEBUGFILE
+ = log4perl.appender.A1.mode=append
+ = log4perl.appender.A1.layout=Log::Log4perl::Layout::PatternLayout
+ = log4perl.appender.A1.layout.ConversionPattern=%d %p> %F{1}:%L %M - %m%n
+
+# Activate certain global debug messages. If you want to combine
+# several options then list them separated by spaces.
+#
+# Possible values include:
+# NONE - no debug output (default)
+# INFO
+# DEBUG1
+# DEBUG2
+# QUERY - Dump SQL queries (only in legacy code; see also "dbix_log4perl" above)
+# TRACE - Track function calls and returns
+# BACKTRACE_ON_ERROR - Print a function call backtrace when $form->error() is called
+# REQUEST_TIMER - Log timing of HTTP requests
+# REQUEST - Log each request. Careful! Passwords get filtered, but
+# there may be confidential information being logged here
+# WARN - warnings
+# SHOW_CALLER - include the file name & line number from where a call
+# to "message" or "dump" was called
+# ALL - all possible debug messages
+#
+# DEVEL - sames as "INFO QUERY TRACE BACKTRACE_ON_ERROR REQUEST_TIMER"
+#
+# Example:
+# global_level = TRACE QUERY
+global_level = NONE
+
+# Activate monitoring of the content of $form. If it is active then
+# monitoring can be turned on for certain variables with the
+# following:
+# $form->{"Watchdog::<variable>"} = 1;
+# Monitoring has a performance cost and is therefore deactivated by
+# default.
+watch_form = 0
+
+# If you want to debug the creation of LaTeX files then set this to 1.
+# That way the temporary LaTeX files created during PDF creation are
+# not removed and remain in the "users" directory.
+keep_temp_files = 0
+
+# Restart the FastCGI process if changes to the program or template
+# files have been detected. The restart will occur after the request
+# in which the changes have been detected has completed.
+restart_fcgi_process_on_changes = 0
+
+# The file name where the debug messages are written to.
+file_name = /tmp/kivitendo-debug.log
+
+# If set to 1 then the installation will be kept unlocked even if a
+# database upgrade fails.
+keep_installation_unlocked = 0
+
+# If set to 1 then all resource links (JavaScript, CSS files) output
+# via $::request->{layout}->use_stylesheet() / use_javascript() will
+# be made unique by appending a random GET parameter. This will cause
+# the web browser to always reload the resources.
+auto_reload_resources = 0
+
+# If set to 1 each exception will include a full stack backtrace.
+backtrace_on_die = 0
+
+[cti]
+# If you want phone numbers to be clickable then this must be set to a
+# command that does the actually dialing. Within this command three
+# variables are replaced before it is executed:
+#
+# 1. <%phone_extension%> and <%phone_password%> are taken from the user
+# configuration (changeable in the admin interface).
+# 2. <%number%> is the number to dial. It has already been sanitized
+# and formatted correctly regarding e.g. the international dialing
+# prefix.
+#
+# The following is an example that works with the OpenUC telephony
+# server:
+# dial_command = curl --insecure -X PUT https://<%phone_extension%>:<%phone_password%>@IP.AD.DR.ESS:8443/sipxconfig/rest/my/call/<%number%>
+dial_command =
+# If you need to dial something before the actual number then set
+# external_prefix to it.
+external_prefix = 0
+# The prefix for international calls (numbers starting with +).
+international_dialing_prefix = 00
+# Our own country code
+our_country_code = 49
projects / projects.git / commitdiff