/users/session_files/
/users/pid/
/config/lx_office.conf
+/config/kivitendo.conf
/doc/online/*/*.html
pod2html*
/doc/build/dobudish*
return unless $class->safe_require($may_fail);
- read_config('config/lx_office.conf.default' => \%::lx_office_conf);
+ # Backwards compatibility: read lx_office.conf.default if
+ # kivitendo.conf.default does't exist.
+ my $default_config = -f "config/kivitendo.conf.default" ? 'kivitendo' : 'lx_office';
+ read_config("config/${default_config}.conf.default" => \%::lx_office_conf);
_decode_recursively(\%::lx_office_conf);
- $file_name ||= 'config/lx_office.conf';
+ $file_name ||= -f 'config/kivitendo.conf' ? 'config/kivitendo.conf' : 'config/lx_office.conf';
if (-f $file_name) {
read_config($file_name => \ my %local_conf);
--- /dev/null
+[authentication]
+# The cleartext password for access to the administrative part. It
+# can only be changed in this file, not via the administrative
+# interface.
+admin_password = admin123
+
+# Which module to use for authentication. Valid values are 'DB' and
+# 'LDAP'. If 'LDAP' is used then users cannot change their password
+# via Lx-Office.
+module = DB
+
+# The cookie name can be changed if desired.
+cookie_name = lx_office_erp_session_id
+
+# The number of minutes a session is valid. The default value is eight
+# hours.
+session_timeout = 480
+
+[authentication/database]
+# Connection information for the database with the user and group
+# inforamtion. This information is always needed, even if LDAP is
+# used for authentication, as the user information is stored in this
+# database while LDAP is only used for password verification.
+#
+# If 'module' is set to 'DB' then this database also contains the
+# users' passwords.
+host = localhost
+port = 5432
+db = lxerp_auth
+user = postgres
+password =
+
+[authentication/ldap]
+# This section is only relevant if 'module' is set to 'LDAP'. It names
+# the LDAP server the passwords are verified against by doing a LDAP
+# bind operation.
+#
+# At least the parameters 'host', 'attribute' and 'base_dn' have to be
+# specified.
+#
+# tls: Activate encryption via TLS
+# attribute: Name of the LDAP attribute containing the user's login name
+# base_dn: Base DN the LDAP searches start from
+# filter: An optional LDAP filter specification. The string '<%login%>'
+# is replaced by the user's login name before the search is started.
+# bind_dn and bind_password:
+# If searching the LDAP tree requires user credentials
+# (e.g. ActiveDirectory) then these two parameters specify
+# the user name and password to use.
+host = localhost
+port = 389
+tls = 0
+attribute = uid
+base_dn =
+filter =
+bind_dn =
+bind_password =
+
+[system]
+# Set language for login and admin forms. Currently "de" (German),
+# "de_DE" (new German) and "en" (English, not perfect) are available.
+language = de
+
+# The database charset. Must match the encoding of the database cluster you want to
+# connect to. (Used on the shell command to create a database "pg_createcluster". Option "-e <encoding>".)
+dbcharset = UTF-8
+
+[features]
+# Activate certain optional features and modules.
+webdav = 0
+vertreter = 0
+
+# Show fields used for the best before date
+# ATTENTION! If you enabled this feature you can not simply turn it off again
+# without taking care that best_before fields are emptied in the database.
+# This can be done with the following query:
+#
+# UPDATE inventory SET bestbefore = NULL;
+#
+# Any stock contents containing a best before date will be impossible to stock
+# out otherwise.
+show_best_before = 0
+
+## Pictures for parts
+# Show the picture in the part form
+parts_show_image = 1
+# Style the picture with the following CSS code:
+parts_image_css = border:0;float:left;max-width:250px;margin-top:20px:margin-right:10px;margin-left:10px;
+# Show the picture in the results when you search for parts
+parts_listing_images = 0
+
+# Should payments be changeable after posting (0 = never; 1 = every time; 2 = on the same day)
+payments_changeable = 1
+
+[paths]
+# path to temporary files (must be writeable by the web server)
+userspath = users
+# spool directory for batch printing
+spool = spool
+# templates base directory
+templates = templates
+# Path to the old memberfile (ignored on new installations)
+memberfile = users/members
+
+[mail_delivery]
+# Delivery method can be 'sendmail' or 'smtp' (the default). For
+# 'method = sendmail' the parameter 'mail_delivery.sendmail' is used
+# as the executable to call. If 'applications.sendmail' still exists
+# (backwards compatibility) then 'applications.sendmail' will be used
+# instead of 'mail_delivery.sendmail'.
+method = smtp
+# Location of sendmail for 'method = sendmail'
+sendmail = /usr/sbin/sendmail -t<%if myconfig_email%> -f <%myconfig_email%><%end%>
+# Settings for 'method = smtp'.
+host = localhost
+port = 25
+# Security can be 'tls', 'ssl' or 'none'. Unset equals 'none'. This
+# determines whether or not encryption is used and which kind. For
+# 'tls' the module 'Net::SMTP::TLS' is required; for 'ssl'
+# 'Net::SMTP::TLS' is required and 'none' only uses 'Net::SMTP'.
+security = tls
+# Authentication is only used if 'login' is set. You should only use
+# that with 'tls' or 'ssl' encryption.
+login =
+password =
+
+[applications]
+# Location of OpenOffice.org writer
+openofficeorg_writer = oowriter
+# Location of the X virtual frame buffer used for OpenOffice
+xvfb = Xvfb
+# Location of the html2ps binary
+html2ps = html2ps
+# Location of the Ghostscript binary
+ghostscript = gs
+# Location of the pdflatex (or compatible, e.g. xetex) binary
+latex = pdflatex
+# Location of the two executables "pg_dump" and "pg_restore" used for
+# database backup and restoration from the admin section. If
+# "pg_dump" or "pg_restore" is set to "DISABLED" then the
+# corresponding option (backup/restoration) will be hidden from the
+# admin section.
+pg_dump = pg_dump
+pg_restore = pg_restore
+
+[environment]
+# Add the following paths to the PATH environment variable.
+path = /usr/local/bin:/usr/X11R6/bin:/usr/X11/bin
+# Add the following paths to the PERL5LIB environment variable.
+# "/sw/lib/perl5" is for Mac OS X with Fink's Perl.
+lib = /sw/lib/perl5
+
+[print_templates]
+# If you have LaTeX installed set to 1
+latex = 1
+# Minimal support for Excel print templates
+excel = 0
+# Enable or disable support for OpenDocument print templates
+opendocument = 1
+# Chose whether or not OpenOffice should remain running after a
+# conversion. If yes then the conversion of subsequent documents will
+# be a lot faster. You need to have Python and the Python UNO bindings
+# (part of OpenOffice) installed.
+openofficeorg_daemon = 1
+openofficeorg_daemon_port = 2002
+
+[task_server]
+# User name to use for database access
+login =
+# Set to 1 for debug messages in /tmp/lx-office-debug.log
+debug = 1
+# Chose a system user the daemon should run under when started as root.
+run_as =
+
+[periodic_invoices]
+# The user name a report about the posted and printed invoices is sent
+# to.
+send_email_to = mb
+# The "From:" header for said email.
+email_from = Lx-Office Daemon <root@localhost>
+# The subject for said email.
+email_subject = Benachrichtigung: automatisch erstellte Rechnungen
+# The template file used for the email's body.
+email_template = templates/webpages/oe/periodic_invoices_email.txt
+
+[self_test]
+
+# modules to be tested
+# Add without SL::BackgroundJob::SelfTest:: prefix
+# Separate with space.
+modules = Transactions
+
+# you probably don't want to be spammed with "everything ok" every day. enable
+# this when you add new tests to make sure they run correctly for a few days
+send_email_on_success = 0
+
+# will log into the standard logfile
+log_to_file = 0
+
+# user login (!) to send the email to.
+send_email_to =
+# will be used to send your report mail
+email_from =
+# The subject line for your report mail
+email_subject = kivitendo self test report
+# template. currently txt and html templates are recognized and correctly mime send.
+email_template = templates/mail/self_test/status_mail.txt
+
+[datev_check]
+# it is possible to make a quick DATEV export everytime you post a record to ensure things
+# work nicely with their data requirements. This will result in a slight overhead though
+# you can enable this for each type of record independantly.
+
+# check when a sales invoice or a payment for a sales invoice is posted
+check_on_sales_invoice = 0
+# check when a purchase invoice or a payment for a purchase invoice is posted
+check_on_purchase_invoice = 0
+# check when an ar transaction is posted
+check_on_ar_transaction = 0
+# check when an ap transaction is posted
+check_on_ap_transaction = 0
+# check when a gl transaction is posted
+check_on_gl_transaction = 0
+
+# not implemented yet:
+#check_on_cash_and_receipt = 0
+#check_on_dunning = 0
+#check_on_sepa_import = 0
+
+[console]
+# autologin to use if none is given
+login =
+
+# autorun lines will be executed after autologin.
+# be warned that loading huge libraries will noticably lengthen startup time.
+#autorun = require "bin/mozilla/common.pl";
+# = use English qw(-no_match_vars);
+# = use List::Util qw(min max);
+# = sub take { my $max = shift; my $r = ref($_[0]) eq 'ARRAY' ? $_[0] : \@_; return @{$r}[0..List::Util::min($max, scalar(@{$r})) - 1]; }
+
+# location of history file for permanent history
+history_file = users/console_history
+
+# location of a separate log file for the console. everything normally written
+# to the lx-office log will be put here if triggered from the console
+log_file = /tmp/lxoffice_console_debug.log
+
+[testing]
+
+# autologin to use if none is given
+login = demo
+
+[debug]
+# Use DBIx::Log4perl for logging DBI calls. The string LXDEBUGFILE
+# will be replaced by the file name configured for $::lxdebug.
+dbix_log4perl = 0
+dbix_log4perl_config = log4perl.logger = FATAL, LOGFILE
+ = log4perl.appender.LOGFILE=Log::Log4perl::Appender::File
+ = log4perl.appender.LOGFILE.filename=LXDEBUGFILE
+ = log4perl.appender.LOGFILE.mode=append
+ = log4perl.appender.LOGFILE.Threshold = ERROR
+ = log4perl.appender.LOGFILE.layout=PatternLayout
+ = log4perl.appender.LOGFILE.layout.ConversionPattern=[%r] %F %L %c - %m%n
+ = log4perl.logger.DBIx.Log4perl=DEBUG, A1
+ = log4perl.appender.A1=Log::Log4perl::Appender::File
+ = log4perl.appender.A1.filename=LXDEBUGFILE
+ = log4perl.appender.A1.mode=append
+ = log4perl.appender.A1.layout=Log::Log4perl::Layout::PatternLayout
+ = log4perl.appender.A1.layout.ConversionPattern=%d %p> %F{1}:%L %M - %m%n
+
+# Activate certain global debug messages. If you want to combine
+# several options then list them seperated by spaces.
+#
+# Possible values include:
+# NONE - no debug output (default)
+# INFO
+# DEBUG1
+# DEBUG2
+# QUERY - Dump SQL queries (only in legacy code; see also "dbix_log4perl" above)
+# TRACE - Track function calls and returns
+# BACKTRACE_ON_ERROR - Print a function call backtrace when $form->error() is called
+# REQUEST_TIMER - Log timing of HTTP requests
+# WARN - warnings
+# ALL - all possible debug messages
+#
+# DEVEL - sames as "INFO QUERY TRACE BACKTRACE_ON_ERROR REQUEST_TIMER"
+#
+# Example:
+# global_level = TRACE QUERY
+global_level = NONE
+
+# Activate monitoring of the content of $form. If it is active then
+# monitoring can be turned on for certain variables with the
+# following:
+# $form->{"Watchdog::<variable>"} = 1;
+# Monitoring has a performance cost and is therefore deactivated by
+# default.
+watch_form = 0
+
+# Include menu options for debugging in the HTML menu. Works only in
+# FastCGI mode.
+show_debug_menu = 0
+
+# If you want to debug the creation of LaTeX files then set this to 1.
+# That way the temporary LaTeX files created during PDF creation are
+# not removed and remain in the "users" directory.
+keep_temp_files = 0
+
+# Restart the FastCGI process if changes to the program or template
+# files have been detected. The restart will occur after the request
+# in which the changes have been detected has completed.
+restart_fcgi_process_on_changes = 0
+
+# The file name where the debug messages are written to.
+file_name = /tmp/lx-office-debug.log
+++ /dev/null
-[authentication]
-# The cleartext password for access to the administrative part. It
-# can only be changed in this file, not via the administrative
-# interface.
-admin_password = admin123
-
-# Which module to use for authentication. Valid values are 'DB' and
-# 'LDAP'. If 'LDAP' is used then users cannot change their password
-# via Lx-Office.
-module = DB
-
-# The cookie name can be changed if desired.
-cookie_name = lx_office_erp_session_id
-
-# The number of minutes a session is valid. The default value is eight
-# hours.
-session_timeout = 480
-
-[authentication/database]
-# Connection information for the database with the user and group
-# inforamtion. This information is always needed, even if LDAP is
-# used for authentication, as the user information is stored in this
-# database while LDAP is only used for password verification.
-#
-# If 'module' is set to 'DB' then this database also contains the
-# users' passwords.
-host = localhost
-port = 5432
-db = lxerp_auth
-user = postgres
-password =
-
-[authentication/ldap]
-# This section is only relevant if 'module' is set to 'LDAP'. It names
-# the LDAP server the passwords are verified against by doing a LDAP
-# bind operation.
-#
-# At least the parameters 'host', 'attribute' and 'base_dn' have to be
-# specified.
-#
-# tls: Activate encryption via TLS
-# attribute: Name of the LDAP attribute containing the user's login name
-# base_dn: Base DN the LDAP searches start from
-# filter: An optional LDAP filter specification. The string '<%login%>'
-# is replaced by the user's login name before the search is started.
-# bind_dn and bind_password:
-# If searching the LDAP tree requires user credentials
-# (e.g. ActiveDirectory) then these two parameters specify
-# the user name and password to use.
-host = localhost
-port = 389
-tls = 0
-attribute = uid
-base_dn =
-filter =
-bind_dn =
-bind_password =
-
-[system]
-# Set language for login and admin forms. Currently "de" (German),
-# "de_DE" (new German) and "en" (English, not perfect) are available.
-language = de
-
-# The database charset. Must match the encoding of the database cluster you want to
-# connect to. (Used on the shell command to create a database "pg_createcluster". Option "-e <encoding>".)
-dbcharset = UTF-8
-
-[features]
-# Activate certain optional features and modules.
-webdav = 0
-vertreter = 0
-
-# Show fields used for the best before date
-# ATTENTION! If you enabled this feature you can not simply turn it off again
-# without taking care that best_before fields are emptied in the database.
-# This can be done with the following query:
-#
-# UPDATE inventory SET bestbefore = NULL;
-#
-# Any stock contents containing a best before date will be impossible to stock
-# out otherwise.
-show_best_before = 0
-
-## Pictures for parts
-# Show the picture in the part form
-parts_show_image = 1
-# Style the picture with the following CSS code:
-parts_image_css = border:0;float:left;max-width:250px;margin-top:20px:margin-right:10px;margin-left:10px;
-# Show the picture in the results when you search for parts
-parts_listing_images = 0
-
-# Should payments be changeable after posting (0 = never; 1 = every time; 2 = on the same day)
-payments_changeable = 1
-
-[paths]
-# path to temporary files (must be writeable by the web server)
-userspath = users
-# spool directory for batch printing
-spool = spool
-# templates base directory
-templates = templates
-# Path to the old memberfile (ignored on new installations)
-memberfile = users/members
-
-[mail_delivery]
-# Delivery method can be 'sendmail' or 'smtp' (the default). For
-# 'method = sendmail' the parameter 'mail_delivery.sendmail' is used
-# as the executable to call. If 'applications.sendmail' still exists
-# (backwards compatibility) then 'applications.sendmail' will be used
-# instead of 'mail_delivery.sendmail'.
-method = smtp
-# Location of sendmail for 'method = sendmail'
-sendmail = /usr/sbin/sendmail -t<%if myconfig_email%> -f <%myconfig_email%><%end%>
-# Settings for 'method = smtp'.
-host = localhost
-port = 25
-# Security can be 'tls', 'ssl' or 'none'. Unset equals 'none'. This
-# determines whether or not encryption is used and which kind. For
-# 'tls' the module 'Net::SMTP::TLS' is required; for 'ssl'
-# 'Net::SMTP::TLS' is required and 'none' only uses 'Net::SMTP'.
-security = tls
-# Authentication is only used if 'login' is set. You should only use
-# that with 'tls' or 'ssl' encryption.
-login =
-password =
-
-[applications]
-# Location of OpenOffice.org writer
-openofficeorg_writer = oowriter
-# Location of the X virtual frame buffer used for OpenOffice
-xvfb = Xvfb
-# Location of the html2ps binary
-html2ps = html2ps
-# Location of the Ghostscript binary
-ghostscript = gs
-# Location of the pdflatex (or compatible, e.g. xetex) binary
-latex = pdflatex
-# Location of the two executables "pg_dump" and "pg_restore" used for
-# database backup and restoration from the admin section. If
-# "pg_dump" or "pg_restore" is set to "DISABLED" then the
-# corresponding option (backup/restoration) will be hidden from the
-# admin section.
-pg_dump = pg_dump
-pg_restore = pg_restore
-
-[environment]
-# Add the following paths to the PATH environment variable.
-path = /usr/local/bin:/usr/X11R6/bin:/usr/X11/bin
-# Add the following paths to the PERL5LIB environment variable.
-# "/sw/lib/perl5" is for Mac OS X with Fink's Perl.
-lib = /sw/lib/perl5
-
-[print_templates]
-# If you have LaTeX installed set to 1
-latex = 1
-# Minimal support for Excel print templates
-excel = 0
-# Enable or disable support for OpenDocument print templates
-opendocument = 1
-# Chose whether or not OpenOffice should remain running after a
-# conversion. If yes then the conversion of subsequent documents will
-# be a lot faster. You need to have Python and the Python UNO bindings
-# (part of OpenOffice) installed.
-openofficeorg_daemon = 1
-openofficeorg_daemon_port = 2002
-
-[task_server]
-# User name to use for database access
-login =
-# Set to 1 for debug messages in /tmp/lx-office-debug.log
-debug = 1
-# Chose a system user the daemon should run under when started as root.
-run_as =
-
-[periodic_invoices]
-# The user name a report about the posted and printed invoices is sent
-# to.
-send_email_to = mb
-# The "From:" header for said email.
-email_from = Lx-Office Daemon <root@localhost>
-# The subject for said email.
-email_subject = Benachrichtigung: automatisch erstellte Rechnungen
-# The template file used for the email's body.
-email_template = templates/webpages/oe/periodic_invoices_email.txt
-
-[self_test]
-
-# modules to be tested
-# Add without SL::BackgroundJob::SelfTest:: prefix
-# Separate with space.
-modules = Transactions
-
-# you probably don't want to be spammed with "everything ok" every day. enable
-# this when you add new tests to make sure they run correctly for a few days
-send_email_on_success = 0
-
-# will log into the standard logfile
-log_to_file = 0
-
-# user login (!) to send the email to.
-send_email_to =
-# will be used to send your report mail
-email_from =
-# The subject line for your report mail
-email_subject = kivitendo self test report
-# template. currently txt and html templates are recognized and correctly mime send.
-email_template = templates/mail/self_test/status_mail.txt
-
-[datev_check]
-# it is possible to make a quick DATEV export everytime you post a record to ensure things
-# work nicely with their data requirements. This will result in a slight overhead though
-# you can enable this for each type of record independantly.
-
-# check when a sales invoice or a payment for a sales invoice is posted
-check_on_sales_invoice = 0
-# check when a purchase invoice or a payment for a purchase invoice is posted
-check_on_purchase_invoice = 0
-# check when an ar transaction is posted
-check_on_ar_transaction = 0
-# check when an ap transaction is posted
-check_on_ap_transaction = 0
-# check when a gl transaction is posted
-check_on_gl_transaction = 0
-
-# not implemented yet:
-#check_on_cash_and_receipt = 0
-#check_on_dunning = 0
-#check_on_sepa_import = 0
-
-[console]
-# autologin to use if none is given
-login =
-
-# autorun lines will be executed after autologin.
-# be warned that loading huge libraries will noticably lengthen startup time.
-#autorun = require "bin/mozilla/common.pl";
-# = use English qw(-no_match_vars);
-# = use List::Util qw(min max);
-# = sub take { my $max = shift; my $r = ref($_[0]) eq 'ARRAY' ? $_[0] : \@_; return @{$r}[0..List::Util::min($max, scalar(@{$r})) - 1]; }
-
-# location of history file for permanent history
-history_file = users/console_history
-
-# location of a separate log file for the console. everything normally written
-# to the lx-office log will be put here if triggered from the console
-log_file = /tmp/lxoffice_console_debug.log
-
-[testing]
-
-# autologin to use if none is given
-login = demo
-
-[debug]
-# Use DBIx::Log4perl for logging DBI calls. The string LXDEBUGFILE
-# will be replaced by the file name configured for $::lxdebug.
-dbix_log4perl = 0
-dbix_log4perl_config = log4perl.logger = FATAL, LOGFILE
- = log4perl.appender.LOGFILE=Log::Log4perl::Appender::File
- = log4perl.appender.LOGFILE.filename=LXDEBUGFILE
- = log4perl.appender.LOGFILE.mode=append
- = log4perl.appender.LOGFILE.Threshold = ERROR
- = log4perl.appender.LOGFILE.layout=PatternLayout
- = log4perl.appender.LOGFILE.layout.ConversionPattern=[%r] %F %L %c - %m%n
- = log4perl.logger.DBIx.Log4perl=DEBUG, A1
- = log4perl.appender.A1=Log::Log4perl::Appender::File
- = log4perl.appender.A1.filename=LXDEBUGFILE
- = log4perl.appender.A1.mode=append
- = log4perl.appender.A1.layout=Log::Log4perl::Layout::PatternLayout
- = log4perl.appender.A1.layout.ConversionPattern=%d %p> %F{1}:%L %M - %m%n
-
-# Activate certain global debug messages. If you want to combine
-# several options then list them seperated by spaces.
-#
-# Possible values include:
-# NONE - no debug output (default)
-# INFO
-# DEBUG1
-# DEBUG2
-# QUERY - Dump SQL queries (only in legacy code; see also "dbix_log4perl" above)
-# TRACE - Track function calls and returns
-# BACKTRACE_ON_ERROR - Print a function call backtrace when $form->error() is called
-# REQUEST_TIMER - Log timing of HTTP requests
-# WARN - warnings
-# ALL - all possible debug messages
-#
-# DEVEL - sames as "INFO QUERY TRACE BACKTRACE_ON_ERROR REQUEST_TIMER"
-#
-# Example:
-# global_level = TRACE QUERY
-global_level = NONE
-
-# Activate monitoring of the content of $form. If it is active then
-# monitoring can be turned on for certain variables with the
-# following:
-# $form->{"Watchdog::<variable>"} = 1;
-# Monitoring has a performance cost and is therefore deactivated by
-# default.
-watch_form = 0
-
-# Include menu options for debugging in the HTML menu. Works only in
-# FastCGI mode.
-show_debug_menu = 0
-
-# If you want to debug the creation of LaTeX files then set this to 1.
-# That way the temporary LaTeX files created during PDF creation are
-# not removed and remain in the "users" directory.
-keep_temp_files = 0
-
-# Restart the FastCGI process if changes to the program or template
-# files have been detected. The restart will occur after the request
-# in which the changes have been detected has completed.
-restart_fcgi_process_on_changes = 0
-
-# The file name where the debug messages are written to.
-file_name = /tmp/lx-office-debug.log
projects / kivitendo-erp.git / commitdiff