From: Michael J.M. Wagner Date: Fri, 4 Feb 2022 21:45:08 +0000 (+0100) Subject: posaune X-Git-Tag: v_0.0-5 X-Git-Url: http://wagnertech.de/git?a=commitdiff_plain;h=0faca42a9939e94f4efe4e36957d915f7209eba3;p=projects.git posaune --- diff --git a/debian/kivitendo.cp b/debian/kivitendo.cp index 165c8e9..fe898d8 100755 --- a/debian/kivitendo.cp +++ b/debian/kivitendo.cp @@ -6,6 +6,10 @@ set -e mkdir -p $1/opt/kivitendo-erp rsync -a --exclude=".git" Downloads/kivitendo-erp/ $1/opt/kivitendo-erp/ +# provide WTG default config file +cp kivitendo/kivitendo.conf.default $1/opt/kivitendo-erp/config/ + +# apache files mkdir -p $1/etc/apache2/sites-available mkdir -p $1/etc/apache2/sites-enabled cp kivitendo/kivitendo.conf $1/etc/apache2/sites-available diff --git a/kivitendo/kivitendo.conf.default b/kivitendo/kivitendo.conf.default new file mode 100644 index 0000000..3023eaa --- /dev/null +++ b/kivitendo/kivitendo.conf.default @@ -0,0 +1,402 @@ +[authentication] +# The cleartext password for access to the administrative part. It +# can only be changed in this file, not via the administrative +# interface. +admin_password = admin123 + +# Which modules to use for authentication. Valid values are 'DB' and +# 'LDAP'. You can use multiple modules separated by spaces. +# +# Multiple LDAP modules with different configurations can be used by +# postfixing 'LDAP' with the name of the configuration section to use: +# 'LDAP:ldap_fallback' would use the data from +# '[authentication/ldap_fallback]'. The name defaults to 'ldap' if it +# isn't given. +# +# Note that the LDAP module doesn't support changing the password. +module = DB + +# The cookie name can be changed if desired. +cookie_name = kivitendo_session_id + +# The number of minutes a session is valid. The default value is eight +# hours. +session_timeout = 480 + +# The number of seconds to penalize failed login attempts. 0 disables +# it. +failed_login_penalty = 5 + +[authentication/database] +# Connection information for the database with the user and group +# inforamtion. This information is always needed, even if LDAP is +# used for authentication, as the user information is stored in this +# database while LDAP is only used for password verification. +# +# If 'module' is set to 'DB' then this database also contains the +# users' passwords. +host = localhost +port = 5432 +db = kivitendo_auth +user = kivitendo +password = admin123 + +[authentication/ldap] +# This section is only relevant if 'module' is set to 'LDAP'. It names +# the LDAP server the passwords are verified against by doing a LDAP +# bind operation. +# +# At least the parameters 'host', 'attribute' and 'base_dn' have to be +# specified. +# +# tls: Activate encryption via TLS +# verify: If 'tls' is used, how to verify the server's certificate. +# Can be one of 'require' or 'none'. +# attribute: Name of the LDAP attribute containing the user's login name +# base_dn: Base DN the LDAP searches start from +# filter: An optional LDAP filter specification. The string '<%login%>' +# is replaced by the user's login name before the search is started. +# bind_dn and bind_password: +# If searching the LDAP tree requires user credentials +# (e.g. ActiveDirectory) then these two parameters specify +# the user name and password to use. +# timeout: Timeout when connecting to the server in seconds. +# +# You can specify a fallback LDAP server to use in case the main one +# isn't reachable by duplicating this whole section as +# "[authentication/ldap_fallback]". +# +host = localhost +port = 389 +tls = 0 +attribute = uid +base_dn = +filter = +bind_dn = +bind_password = +timeout = 10 +verify = require + +[system] +# Set language for login and admin forms. Currently "de" (German) +# and "en" (English, not perfect) are available. +language = de +# MassPrint Timeout +# must be less than cgi timeout +# +massprint_timeout = 30 + +# Set default_manager for admin forms. Currently "german" +# and "swiss" are available. +default_manager = german + +# The memory limits given here determine the maximum process size +# (vsz, the total amount of memory this process uses including memory +# swapped out or shared with other processes) or resident set size +# (rss, the amount of memory not swapped out/shared with other +# processes). If either limit is reached at the end of the request +# then the kivitendo process will exit. +# +# This only applies for processes under FCGI and the task manager. +# For CGI configurations the process will be terminated after each request +# regardless of this setting. +# +# Note: this will only terminate processes with too high memory consumption. It +# is assumed that an external managing service will start new instances. For +# FCGI this will usually be apache or the wrapper scripts for nginx, for the +# task server this will have to be the system manager. +# +# Numbers can be postfixed with KB, MB, GB. If no number is given or +# the number is 0 then no checking will be performed. +memory_limit_rss = +memory_limit_vsz = + +[paths] +# path to temporary files (must be writeable by the web server) +userspath = users +# spool directory for batch printing +spool = spool +# templates base directory +templates = templates +# Path to the old memberfile (ignored on new installations) +memberfile = users/members +# Path to ELSTER geierlein webserver path inside kivitendo +# (must be inside kivitendo but you can set an ALIAS for apache/oe +# if set the export to geierlein is enabled +# geierlein_path = geierlein + +# +# document path for FileSystem FileManagement: +# (must be reachable read/write but not executable from webserver) +# document_path = /var/local/kivi_documents +# + +[mail_delivery] +# Delivery method can be 'sendmail' or 'smtp'. For 'method = sendmail' the +# parameter 'mail_delivery.sendmail' is used as the executable to call. If +# 'applications.sendmail' still exists (backwards compatibility) then +# 'applications.sendmail' will be used instead of 'mail_delivery.sendmail'. +# If method is empty, mail delivery is disabled. +method = smtp +# Location of sendmail for 'method = sendmail' +sendmail = /usr/sbin/sendmail -t<%if myconfig_email%> -f <%myconfig_email%><%end%> +# Settings for 'method = smtp'. Only set 'port' if your SMTP server +# runs on a non-standard port (25 for 'security=none' or +# 'security=tls', 465 for 'security=ssl'). +host = localhost +#port = 25 +# Security can be 'tls', 'ssl' or 'none'. Unset equals 'none'. This +# determines whether or not encryption is used and which kind. For +# 'tls' the module 'Net::SSLGlue' is required; for 'ssl' +# 'Net::SMTP::SSL' is required and 'none' only uses 'Net::SMTP'. +security = none +# Authentication is only used if 'login' is set. You should only use +# that with 'tls' or 'ssl' encryption. +login = +password = + +[applications] +# Location of OpenOffice.org writer +openofficeorg_writer = oowriter +# Location of the X virtual frame buffer used for OpenOffice +xvfb = Xvfb +# Location of the html2ps binary +html2ps = html2ps +# Location of the Ghostscript binary +ghostscript = gs +# Location of the pdflatex (or compatible, e.g. xetex) binary +latex = pdflatex +# Location of the Python interpreter to use when converting from +# OpenDocument to PDF. Some distributions compile UNO support only +# into binaries located in different locations than the main Python +# binary. +python_uno = python + +# Location of the aqbanking binary to use when converting MT940 files +# into the kivitendo import format +aqbanking = /usr/bin/aqbanking-cli + +[environment] +# Add the following paths to the PATH environment variable. +path = /usr/local/bin:/usr/X11R6/bin:/usr/X11/bin +# Add the following paths to the PERL5LIB environment variable. +# "/sw/lib/perl5" is for Mac OS X with Fink's Perl. +lib = /sw/lib/perl5 +# Add the following paths to the PYTHONPATH environment variable for +# locating Python modules. Python is used when converting OpenDocument +# files into PDF files. +python_uno_path = + +[print_templates] +# If you have LaTeX installed set to 1 +latex = 1 +# Minimal support for Excel print templates +excel = 0 +# Enable or disable support for OpenDocument print templates +opendocument = 1 +# Chose whether or not OpenOffice should remain running after a +# conversion. If yes then the conversion of subsequent documents will +# be a lot faster. You need to have Python and the Python UNO bindings +# (part of OpenOffice) installed. +openofficeorg_daemon = 1 +openofficeorg_daemon_port = 2002 + +[task_server] +# Set to 1 for debug messages in /tmp/kivitendo-debug.log +debug = 0 +# Chose a system user the daemon should run under when started as root. +run_as = +# Task servers can run on multiple machines. Each needs its own unique +# ID. If unset, it defaults to the host name. All but one task server +# must have 'only_run_tasks_for_this_node' set to 1. +node_id = +only_run_tasks_for_this_node = 0 + +[task_server/notify_on_failure] +# If you want email notifications for failed jobs then set this to a +# kivitendo user (login) name. The subject can be changed as well. +send_email_to = +# The "From:" header for said email. +email_from = kivitendo Daemon +# The subject for said email. +email_subject = kivitendo Task-Server: Hintergrundjob fehlgeschlagen +# The template file used for the email's body. +email_template = templates/webpages/task_server/failure_notification_email.txt + +[periodic_invoices] +# The user name a report about the posted and printed invoices is sent +# to. +send_email_to = mb +# The "From:" header for said email. +email_from = kivitendo Daemon +# The subject for said email. +email_subject = Benachrichtigung: automatisch erstellte Rechnungen +# The template file used for the email's body. +email_template = templates/webpages/oe/periodic_invoices_email.txt + +[self_test] + +# modules to be tested +# Add without SL::BackgroundJob::SelfTest:: prefix +# Separate with space. +modules = Transactions + +# you probably don't want to be spammed with "everything ok" every day. enable +# this when you add new tests to make sure they run correctly for a few days +send_email_on_success = 0 + +# will log into the standard logfile +log_to_file = 0 + +# user login (!) to send the email to. +send_email_to = +# will be used to send your report mail +email_from = +# The subject line for your report mail +email_subject = kivitendo self test report +# template. currently txt and html templates are recognized and correctly mime send. +email_template = templates/mail/self_test/status_mail.txt + +[console] +# Automatic login will only work if both "client" and "login" are +# given. "client" can be a client's database ID or its name. "login" +# is simply a user's login name. +client = +login = + +# autorun lines will be executed after autologin. +# be warned that loading huge libraries will noticably lengthen startup time. +#autorun = require "bin/mozilla/common.pl"; +# = use English qw(-no_match_vars); +# = use List::Util qw(min max); +# = sub take { my $max = shift; my $r = ref($_[0]) eq 'ARRAY' ? $_[0] : \@_; return @{$r}[0..List::Util::min($max, scalar(@{$r})) - 1]; } + +# location of history file for permanent history +history_file = users/console_history + +# location of a separate log file for the console. everything normally written +# to the kivitendo log will be put here if triggered from the console +log_file = /tmp/kivitendo_console_debug.log + +[testing] + +# Several tests need a database they can alter data in freely. This +# database will be dropped & created before any other test is run. The +# following parameters must be given: +[testing/database] +host = localhost +port = 5432 +db = +user = postgres +password = +template = template1 +superuser_user = postgres +superuser_password = + +[devel] +# Several settings related to the development of kivitendo. + +# "client" is used by several scripts (e.g. rose_auto_create_model.pl) +# when they need access to the database. It can be either a client's +# database ID or its name. +client = + +[debug] +# Use DBIx::Log4perl for logging DBI calls. The string LXDEBUGFILE +# will be replaced by the file name configured for $::lxdebug. +dbix_log4perl = 0 +dbix_log4perl_config = log4perl.logger = FATAL, LOGFILE + = log4perl.appender.LOGFILE=Log::Log4perl::Appender::File + = log4perl.appender.LOGFILE.filename=LXDEBUGFILE + = log4perl.appender.LOGFILE.mode=append + = log4perl.appender.LOGFILE.Threshold = ERROR + = log4perl.appender.LOGFILE.layout=PatternLayout + = log4perl.appender.LOGFILE.layout.ConversionPattern=[%r] %F %L %c - %m%n + = log4perl.logger.DBIx.Log4perl=DEBUG, A1 + = log4perl.appender.A1=Log::Log4perl::Appender::File + = log4perl.appender.A1.filename=LXDEBUGFILE + = log4perl.appender.A1.mode=append + = log4perl.appender.A1.layout=Log::Log4perl::Layout::PatternLayout + = log4perl.appender.A1.layout.ConversionPattern=%d %p> %F{1}:%L %M - %m%n + +# Activate certain global debug messages. If you want to combine +# several options then list them separated by spaces. +# +# Possible values include: +# NONE - no debug output (default) +# INFO +# DEBUG1 +# DEBUG2 +# QUERY - Dump SQL queries (only in legacy code; see also "dbix_log4perl" above) +# TRACE - Track function calls and returns +# BACKTRACE_ON_ERROR - Print a function call backtrace when $form->error() is called +# REQUEST_TIMER - Log timing of HTTP requests +# REQUEST - Log each request. Careful! Passwords get filtered, but +# there may be confidential information being logged here +# WARN - warnings +# SHOW_CALLER - include the file name & line number from where a call +# to "message" or "dump" was called +# ALL - all possible debug messages +# +# DEVEL - sames as "INFO QUERY TRACE BACKTRACE_ON_ERROR REQUEST_TIMER" +# +# Example: +# global_level = TRACE QUERY +global_level = NONE + +# Activate monitoring of the content of $form. If it is active then +# monitoring can be turned on for certain variables with the +# following: +# $form->{"Watchdog::"} = 1; +# Monitoring has a performance cost and is therefore deactivated by +# default. +watch_form = 0 + +# If you want to debug the creation of LaTeX files then set this to 1. +# That way the temporary LaTeX files created during PDF creation are +# not removed and remain in the "users" directory. +keep_temp_files = 0 + +# Restart the FastCGI process if changes to the program or template +# files have been detected. The restart will occur after the request +# in which the changes have been detected has completed. +restart_fcgi_process_on_changes = 0 + +# The file name where the debug messages are written to. +file_name = /tmp/kivitendo-debug.log + +# If set to 1 then the installation will be kept unlocked even if a +# database upgrade fails. +keep_installation_unlocked = 0 + +# If set to 1 then all resource links (JavaScript, CSS files) output +# via $::request->{layout}->use_stylesheet() / use_javascript() will +# be made unique by appending a random GET parameter. This will cause +# the web browser to always reload the resources. +auto_reload_resources = 0 + +# If set to 1 each exception will include a full stack backtrace. +backtrace_on_die = 0 + +[cti] +# If you want phone numbers to be clickable then this must be set to a +# command that does the actually dialing. Within this command three +# variables are replaced before it is executed: +# +# 1. <%phone_extension%> and <%phone_password%> are taken from the user +# configuration (changeable in the admin interface). +# 2. <%number%> is the number to dial. It has already been sanitized +# and formatted correctly regarding e.g. the international dialing +# prefix. +# +# The following is an example that works with the OpenUC telephony +# server: +# dial_command = curl --insecure -X PUT https://<%phone_extension%>:<%phone_password%>@IP.AD.DR.ESS:8443/sipxconfig/rest/my/call/<%number%> +dial_command = +# If you need to dial something before the actual number then set +# external_prefix to it. +external_prefix = 0 +# The prefix for international calls (numbers starting with +). +international_dialing_prefix = 00 +# Our own country code +our_country_code = 49