--- /dev/null
+#ifndef _LINUX_VIRTIO_NET_H
+#define _LINUX_VIRTIO_NET_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_types.h>
+#include <linux/if_ether.h>
+
+/* The feature bitmap for virtio net */
+#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
+#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
+#define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Dynamic offload configuration. */
+#define VIRTIO_NET_F_MTU 3 /* Initial MTU advice */
+#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
+#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
+#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
+#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
+#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
+#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
+#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
+#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
+#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
+#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
+#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
+#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
+#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
+ * network */
+#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
+ * Steering */
+#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
+
+#define VIRTIO_NET_F_STANDBY 62 /* Act as standby for another device
+ * with the same MAC.
+ */
+#define VIRTIO_NET_F_SPEED_DUPLEX 63 /* Device set linkspeed and duplex */
+
+#ifndef VIRTIO_NET_NO_LEGACY
+#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
+#endif /* VIRTIO_NET_NO_LEGACY */
+
+#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
+#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
+
+struct virtio_net_config {
+ /* The config defining mac address (if VIRTIO_NET_F_MAC) */
+ __u8 mac[ETH_ALEN];
+ /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
+ __u16 status;
+ /* Maximum number of each of transmit and receive queues;
+ * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ.
+ * Legal values are between 1 and 0x8000
+ */
+ __u16 max_virtqueue_pairs;
+ /* Default maximum transmit unit advice */
+ __u16 mtu;
+ /*
+ * speed, in units of 1Mb. All values 0 to INT_MAX are legal.
+ * Any other value stands for unknown.
+ */
+ __u32 speed;
+ /*
+ * 0x00 - half duplex
+ * 0x01 - full duplex
+ * Any other value stands for unknown.
+ */
+ __u8 duplex;
+} __attribute__((packed));
+
+/*
+ * This header comes first in the scatter-gather list. If you don't
+ * specify GSO or CSUM features, you can simply ignore the header.
+ *
+ * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf,
+ * only flattened.
+ */
+struct virtio_net_hdr_v1 {
+#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */
+#define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */
+ __u8 flags;
+#define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */
+#define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */
+#define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */
+#define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */
+#define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */
+ __u8 gso_type;
+ __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
+ __virtio16 gso_size; /* Bytes to append to hdr_len per frame */
+ __virtio16 csum_start; /* Position to start checksumming from */
+ __virtio16 csum_offset; /* Offset after that to place checksum */
+ __virtio16 num_buffers; /* Number of merged rx buffers */
+};
+
+#ifndef VIRTIO_NET_NO_LEGACY
+/* This header comes first in the scatter-gather list.
+ * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must
+ * be the first element of the scatter-gather list. If you don't
+ * specify GSO or CSUM features, you can simply ignore the header. */
+struct virtio_net_hdr {
+ /* See VIRTIO_NET_HDR_F_* */
+ __u8 flags;
+ /* See VIRTIO_NET_HDR_GSO_* */
+ __u8 gso_type;
+ __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
+ __virtio16 gso_size; /* Bytes to append to hdr_len per frame */
+ __virtio16 csum_start; /* Position to start checksumming from */
+ __virtio16 csum_offset; /* Offset after that to place checksum */
+};
+
+/* This is the version of the header to use when the MRG_RXBUF
+ * feature has been negotiated. */
+struct virtio_net_hdr_mrg_rxbuf {
+ struct virtio_net_hdr hdr;
+ __virtio16 num_buffers; /* Number of merged rx buffers */
+};
+#endif /* ...VIRTIO_NET_NO_LEGACY */
+
+/*
+ * Control virtqueue data structures
+ *
+ * The control virtqueue expects a header in the first sg entry
+ * and an ack/status response in the last entry. Data for the
+ * command goes in between.
+ */
+struct virtio_net_ctrl_hdr {
+ __u8 class;
+ __u8 cmd;
+} __attribute__((packed));
+
+typedef __u8 virtio_net_ctrl_ack;
+
+#define VIRTIO_NET_OK 0
+#define VIRTIO_NET_ERR 1
+
+/*
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable. Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
+ */
+#define VIRTIO_NET_CTRL_RX 0
+ #define VIRTIO_NET_CTRL_RX_PROMISC 0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI 2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI 3
+ #define VIRTIO_NET_CTRL_RX_NOUNI 4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST 5
+
+/*
+ * Control the MAC
+ *
+ * The MAC filter table is managed by the hypervisor, the guest should
+ * assume the size is infinite. Filtering should be considered
+ * non-perfect, ie. based on hypervisor resources, the guest may
+ * received packets from sources not specified in the filter list.
+ *
+ * In addition to the class/cmd header, the TABLE_SET command requires
+ * two out scatterlists. Each contains a 4 byte count of entries followed
+ * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
+ * first sg list contains unicast addresses, the second is for multicast.
+ * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
+ * is available.
+ *
+ * The ADDR_SET command requests one out scatterlist, it contains a
+ * 6 bytes MAC address. This functionality is present if the
+ * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
+ */
+struct virtio_net_ctrl_mac {
+ __virtio32 entries;
+ __u8 macs[][ETH_ALEN];
+} __attribute__((packed));
+
+#define VIRTIO_NET_CTRL_MAC 1
+ #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
+ #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
+
+/*
+ * Control VLAN filtering
+ *
+ * The VLAN filter table is controlled via a simple ADD/DEL interface.
+ * VLAN IDs not added may be filterd by the hypervisor. Del is the
+ * opposite of add. Both commands expect an out entry containing a 2
+ * byte VLAN ID. VLAN filterting is available with the
+ * VIRTIO_NET_F_CTRL_VLAN feature bit.
+ */
+#define VIRTIO_NET_CTRL_VLAN 2
+ #define VIRTIO_NET_CTRL_VLAN_ADD 0
+ #define VIRTIO_NET_CTRL_VLAN_DEL 1
+
+/*
+ * Control link announce acknowledgement
+ *
+ * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
+ * driver has recevied the notification; device would clear the
+ * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
+ * this command.
+ */
+#define VIRTIO_NET_CTRL_ANNOUNCE 3
+ #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
+
+/*
+ * Control Receive Flow Steering
+ *
+ * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
+ * enables Receive Flow Steering, specifying the number of the transmit and
+ * receive queues that will be used. After the command is consumed and acked by
+ * the device, the device will not steer new packets on receive virtqueues
+ * other than specified nor read from transmit virtqueues other than specified.
+ * Accordingly, driver should not transmit new packets on virtqueues other than
+ * specified.
+ */
+struct virtio_net_ctrl_mq {
+ __virtio16 virtqueue_pairs;
+};
+
+#define VIRTIO_NET_CTRL_MQ 4
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
+
+/*
+ * Control network offloads
+ *
+ * Reconfigures the network offloads that Guest can handle.
+ *
+ * Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit.
+ *
+ * Command data format matches the feature bit mask exactly.
+ *
+ * See VIRTIO_NET_F_GUEST_* for the list of offloads
+ * that can be enabled/disabled.
+ */
+#define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5
+#define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0
+
+#endif /* _LINUX_VIRTIO_NET_H */
projects / cross.git / blobdiff